"Samsung" pradeda masinę žetonų gamybą, naudodama "10nm Low Power Plus" (10LPP) proceso technologiją

"Samsung Foundry" trečiadienį parodė, kad pradėjo masinę "SoC" produktų gamybą, naudojant antrosios kartos 10 nm Low Power Plus (10LPP) gamybos technologiją. Naujasis gamybos procesas leis kūrėjams lustų sumažinti energijos suvartojimą arba padidinti jų produktyvumą, palyginti su pirmojo geno 10 nm tech (10LPE).

Like previous node updates from Samsung, the new 10LPP fabrication process promises a range of improvements depending on what a customer is looking for. On the performance front the process is said to offer 10% higher performance at the same complexity and power, or alternatively, customers can design for an up to 15% reduction in power consumption at the same frequency and complexity. Samsung Foundry does not disclose how it managed to improve the 10LPP vs. the 10LPE, but it is logical to assume that the company had to optimize the transistor structure somehow. Samsung’s 10LPP and 10LPE technologies are still very similar from design rules and manufacturing points of view, so experience obtained with the former will be applicable to the latter.

Reklamuojamos naujos proceso technologijos PPA patobulinimai
Bendrovių paskelbti duomenys konferencijų metu, spaudos pranešimuose ir spaudos pranešimuose
vs 28LPP
vs 14LPE
vs 14LPP
vs 10LPE
vs 10LPP
galia 60% 40% 30% ~ 15% ? 10%
spektaklis 40% 27% > 10% ~ 10% ? ?
Teritorijos mažinimas 50% 30% 30% nė vienas ? 10%

Samsung Foundry says that SoCs made using the 10LPP process technology will be used in devices to be launched early next year and onwards. The contract maker of semiconductors does not officially disclose which chips it is producing using the 10LPP process technology, but since it uses plural (“SoC products”), it all but given that there are more than one 10LPP SoC model in production. One of the candidates to be produced using the 10LPP is Samsung’s own Exynos 9 Series 9810 SoC that is expected to power the company’s 2018 flagship Galaxy S smartphones. Typically, Qualcomm also adopts Samsung’s latest process technologies along with the South Korean giant itself (to a large degree because its chips are used inside flagship Galaxy handsets too), but so far, Qualcomm has not made any announcements concerning the 10LPP.

Keeping in mind that while Samsung Foundry’s LPE process technologies are used primarily by Samsung itself and a very limited number of its customers, the LPP processes are adopted by a considerably larger group of clients. So the launch of the 10LPP means expanded usage of the company’s 10 nm node in general. In order to meet demand, Samsung will start to make SoCs using the 10LPP in its new S3 fab located in Hwaseong, Korea.

Meanwhile, the evolution of Samsung’s 10 nm node is not going to stop with the formal introduction of the 10LPP. Going forward, Samsung plans to introduce the 10LPU fabrication technology for ultra-low-power SoCs as well as the 8LPP pažangių sojų mišinių gamybos procesas. Samsung dar turi išsamiai apibūdinti 10LPU, tačiau su 8LPP ji žada sumažinti 10% plotą (tuo pačiu sudėtingumu), taip pat 10% mažesnės energijos sąnaudos (tuo pačiu dažnumu ir sudėtingumu), palyginti su 10LPP procesu, dėl siauresnių metalo aikštelės ir kiti optimizavimai.

“We will be able to better serve our customers through the migration from 10LPE to 10LPP with improved performance and higher initial yield,” said Ryan Lee, vice president of foundry marketing at Samsung Electronics. “Samsung with its long-living 10nm process strategy will continue to work on the evolution of 10nm technology down to 8LPP to offer customers distinct competitive advantages for a wide range of applications.”



Palikti atsakymą

GTranslate Your license is inactive or expired, please subscribe again!