Enable Ping Reply and FTP Traffic in Windows 10 and Server
Simple Steps to Enable Ping Reply in Windows 10
There is a pre-built firewall rule in Windows 10 to enable or disable ICMP echo request. By default it was disabled, we can enable the rule to allow ping requests in Windows 10 which can reply back to other network devices in local or external network.
To open the rule, go to control panel by right clicking on start button and select Control Panel.
Make sure to enable ‘Large Icon’ view in control panel to access Windows Firewall settings quickly and easily.
Click on Advanced Settings to get the ICMP rule (incoming and outbound connections) option.
Since we are going to allow incoming ping request, we need to open the Inbound Rules area and look for Echo Request –ICMPv4 rule as shown below.
Once you have enabled the Echo Request for ICMPv4 which is for IP v4, then your Windows 10 computer will respond to ping requests. You will see ‘Private’, ‘Public’ and ‘Domain’ network profiles in the advanced Firewall security settings while enabling or creating rules. Windows OS have each rule for every network profile. You have to enable the only profile which is related to your current connection.
For example, if you are at home or office local network, then the connection mostly will be in ‘Private’ or ‘Domain’ network profile. Therefore enable the Echo Request rule for these profiles only. If you connect the same laptop to any public internet network (like coffee shop or airport WiFi), Windows 10 will treat it as the public network profile. In this case, your Windows 10 computer will not respond to ping requests which come from internet to your computer, because Echo Request rule is not enabled for ‘Public’ network profile. That’s the reasons it is always recommended to not enabling unwanted firewall rules for public network profile.
To Disable Ping Reply in Windows 10
Just simply right click on the same rule ( for private or domain network profile) and disable it Now your Windows 10 computer will not respond to ping requests from the connected network devices.
How to Enable Incoming FTP Traffic in Windows 10 Firewall
Once you setup FTP server on Windows 10 computer, then you must enable inbound FTP traffic in the firewall settings. It can be done in few methods.
1) Open the control panel, Windows Firewall settings and click on ‘Allow an App or feature through Windows Firewall’.
Assuming that you have already installed IIS and enabled FTP server on Windows 10, the firewall settings will automatically detect the FTP server application and list out in the field.
Click on‘Change Settings’ and choose ‘FTP Server’ then the network profile currently the computer is connected, press OK to complete the steps.
For a detailed guide about this method, click here to visit the original site.
By any chance you are not succeeded in above method or you can’t see the FTP server app in programs list in firewall settings, you can manually create inbound rule and allow particular FTP ports ( 20 and 21). Since the advanced firewall settings remain same for Windows 10 and Windows 8.1, refer our earlier guide to enable FTP traffic in Windows 8.1.
Also, you can enable the FTP inbound traffic in Windows 10 firewall by command prompt with simple command which is explained at Microsoft site here.
Hope this simple guide would be clear enough change few firewall advanced settings in Windows 10 laptop or desktop.